Home

About Us

Equipment

Services

Contact Us

The Okuma Captain L-370 is a versatile 2-axis turning machine.  It has a twelve station turret with a maximum X-axis travel of  20.8” and Z-axis travel of 20.47”.  The Captain is capable of turning pieces up to 14.56” in diameter and at rates up to 3,500 RPM.  Both of our Captain L-370’s are outfitted with LNS bar feeders with the capacity to feed material up to 2” diameter

OKUMA CAPTAIN L-370

The Okuma LB-9 is our second operation machine.  It has an eight station   turret.  The Okuma LB-9 can accommodate pieces up to 10 inches in diameter and at rates up to 7,000 RPM.

OKUMA LB-9

The Daewoo 3016L is our newest vertical milling  machine.  It has a 12,000 RPM 20-hp spindle motor and 30 tool magazine.  The 3016L also has a maximum X-axis travel of  30 in., Y axis travel of 16.1 in., and Z-axis of 20.1 in at rapid travel rates up to 1,417 ipm.

Daewoo 3016L

The Amada HA 250W is an automatic feed horizontal band saw with the capacity to cut round material ranging from .3—10 inches in diameter.  Our Amada saw is  also equipped with a 13’ roller table .

AMADA HA 250W

Equipment

To contact us call:

317.738.0275

CNC Machining Specialists

W.T. Boone Enterprises, Inc

The Okuma 4020 has an 8,000 RPM 15-hp spindle motor and 15 tool        magazine. It has a maximum X-axis travel of 40 in., a maximum Y-axis travel of 20 in, and rigid tapping ability.

OKUMA 4020

OKUMA 4-VA

The Okuma 4-VA has an 6,000 RPM 10-hp spindle. X axis travel of 32 inches Y axis travel of 16 inches

· Three Model 2Uvr Vertical Milling Machine

· CLAUSING Model 5914 Horizontal Lathe

· WELLS Model 58N Saw

· DI-ACRO Shear Model no. 36

MANUAL MACHINARY

· ROCKWELL Drill Press

· Tapping Heads

· ROLL-IN Vertical Band Saw

· REID Model 2-C Surface Grinder